Laser Service near Sheffield, Thinklaser Lightblade 6090 60 watt – Carrs of Sheffield
A visit to a long term customer, Carrs of Sheffield was required as the customer had requested their annual service, which we would recommend for all our customers. The laser service was conducted by our highly experience service engineer ‘Gavin Edwards’. The laser service visit included: –
Thinklaser Lightblade 6090 60 watt
Upon arrival at Carrs of Sheffield the machine was visually inspected. The machine was in good condition. The service items that were carried out: –
- Clean All Mirrors and Main Focusing Lens
- Water Cooling Chiller Inspection, Clean, Drain & Refill
- Inspect, Clean and Lubricate all Linear/Guide Rails
- Auto Focus Pen Inspection & Clean
- Inspect and Hoovered out the laser chamber and bed area
- Inspect, Drain and Refill Chiller cooling circuit
- Electronics Inspection
- Check Bed Level
- Check the field scale calibration of both X and Y axes. The X calibration was altered slightly.
- Safety Interlocks Inspection & Test
- Check overall machine function by Test Cutting Customer Materials
The laser power was measured through the nozzle and was reading a power of 62.55w @ 22mA 82%.
Carrs of Sheffield use their laser machine to not only Laser Engrave Silver, but to also cutout jiggs and templates for their products. If you are interested in any products that Carrs of Sheffield can engrave in Silver and more please visit their dedicated web page: Personalised Engraving of Silver Gifts | Carrs Silver
Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.
If you would like further information on our Laser Service near Sheffield capabilities or anywhere else in the country, or any other Laser Training requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.
Contact Us for Laser Engraving, Marking & Cutting Ad
Frequently Asked Questions:
How do I improve Inconsistent Cutting Depth?
Verify that the laser head is correctly focused for the material’s thickness
Check for debris or dust on the mirrors and lenses.
Ensure that the cutting bed is level across the entire work area.
How do I stop the laser from cutting unevenly?
Inspect and clean the optical components (mirrors and lenses).
Check that the work bed is level; an uneven bed will affect cutting depth.
Ensure the material is flat and secured in place on the bed.
How to stop the laser head dragging on Material
Ensure that the material is flat and not bowed or warped.
Check the height adjustment of the laser head and set the correct z-axis distance.
Verify that the workpiece is secured properly on the bed.
