Laser Service near Poole on a Boxford 6090 – 80 watt – Magna Academy

The visit to our new customer, Magna Academy was requested as the customer was requiring a service on their Boxford laser machine.  There were no known issues reported with the machine. This laser service was conducted by our highly experienced service engineer ‘Gavin Edwards’. The visit included: –

Boxford Laser 6090 – 80 watt

On arrival at Magna Academy the Boxford machine was visually inspected. The laser machine was dated December 2022.  The room with which the laser was installed was very small with only one main door. The may mean that natural ventilation of the system is not possible, so extra care would be required when processing material to ensure that the unit doesn’t overheat or that the extraction is well maintained to avoid any gaseous buildup.

The laser service was then commenced by initially inspecting the mirror and the main focusing lens. Mirror number 1 was contaminated but this was cleanable.  The main focusing lens had a small blemish on the surface, however this would not effect the main cutting or engraving function of the machine.

Laser Service Near Poole - Magna Academy - Boxford 6090 - Blemish Focusing Lens

The nozzle was found to heavily contaminated with processing residue.  The nozzle and autofocus pen were cleaned and reinstated.  Following this cleaning process the alignment was checked.  The main alignment up until mirror 3 was good.  However mirror 3 needed some adjustment in order ensure that the beam was central in the nozzle aperture and also parallel to the Z-axis.

Laser Service Near Poole - Magna Academy - Boxford 6090 - Dirty Nozzle

The remaining service items were carried out with little to no issues: –

  • Inspected, Drained and Flushed chiller before refilling with Distilled Water
  • Inspected and Cleaned Belts
  • Inspect, Clean and Lubricate all Linear/Guide Rails
  • Calibrate Bed Level
  • Checked all Sensor and switches
  • Cleaned Extractor Grill
  • Electronics Inspection
  • Safety Interlocks Inspection & Test

The laser power was tested at the exit to the nozzle. The power was shown to be reading 78.5w @85% power.

Laser Service Near Poole - Magna Academy - Boxford 6090 - 1Laser Service Near Poole - Magna Academy - Boxford 6090 - 2

The customer had a Purex 400i extraction system installed.  The system was given a functionality check and a filter check.  The filters had both been replaced in early 2026.  The pre-filter was showing slight discolouration signs

Laser Service Near Poole - Magna Academy - Boxford 6090 - Discoloured Pre-Filter

Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.

If you would like further information on our Laser Service near Poole capabilities or anywhere else in the country, or any other Laser Repairing requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.

Contact Us for Laser Engraving, Marking & Cutting Advice (thinklaser.com)

Frequently Asked Questions:

How do I improve Inconsistent Cutting Depth?

Verify that the laser head is correctly focused for the material’s thickness
Check for debris or dust on the mirrors and lenses.
Ensure that the cutting bed is level across the entire work area.

How do I stop the laser from cutting unevenly?

Inspect and clean the optical components (mirrors and lenses).
Check that the work bed is level; an uneven bed will affect cutting depth.
Ensure the material is flat and secured in place on the bed.

How to stop the laser head dragging on Material

Ensure that the material is flat and not bowed or warped.
Check the height adjustment of the laser head and set the correct z-axis distance.
Verify that the workpiece is secured properly on the bed.

 

Independent service provider disclaimer: Thinklaser is not affiliated with or endorsed by any laser system manufacturer unless explicitly stated.

 aria-label=

Our Service Studies

Laser Machine Service Near Canvey Island - Lotus Laser Ll10060 Lotus Laser Machine Service

Laser Machine Service near Canvey Island, Lotus Laser LL10060 30 watt Machine
VIEW SERVICE STUDY
Laser Machine Service Near Northampton - Mansfield Board Machinery Lightblade 6090 Dual Source Laser Cutter Service Near Northampton

Laser Machine Service near Northampton, Thinklaser Lightblade 6090 DS Machine
VIEW SERVICE STUDY
Laser Machine Service Near Baldock - Door Open

Laser Machine Service near Baldock, Thinklaser Lightblade 6090 – 80 watt
VIEW SERVICE STUDY