Laser Machine Service near Royston, on a Thinklaser Lightblade 6090 80W – Angle & Squint
The visit to our customer The Angle and Squint Company was due to the customer having requested their annual laser service on their Thinklaser Lightblade 6090 80 watt flatbed laser marker, which we would recommend for all our customers. This service was conducted by our highly experienced service engineer ‘Gavin Edwards’. The laser marker service visit includes: –
Thinklaser Lightblade 6090 80 watt
Upon arrival at The Angle and Squint Company the flatbed machine was visually inspected. Due to the location of the machine in an outside workshop, the machine was covered in a lot of brick dust, on the outer and inner surfaces of the machine.
Due to this brick dust, all the mirrors and the main focusing lens were dirty. These were cleaned with IPA to start, but was found that Acetone was needed to properly clean some marks.
The remaining service items were carried out with little to no issue raised: –
- Inspect, Clean and Lubricate all Linear/Guide Rails
- Auto Focus Pen Inspection & Clean
- Honey Comb Bed Inspection & Leveling – Slight Adjustment Required
- Electronics Inspection
- Safety Interlocks Inspection & Test
- Water Cooling Chiller Inspection, Clean, Drain & Refill
- Full Laser Alignment Check – Slight Adjustment required
- Laser Tube Health Check
The laser power was tested at the exit aperture to the laser nozzle. This was shown to be measuring 78.1w @25mA @ 85% power.
Some of The Angle and Squint Company‘s jobs were run on the machine as a final test and the customer was happy with the outcome.
Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.
If you would like further information on our Laser Machine Service near Royston capabilities or anywhere else in the country, or any other Laser Repairing requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.
Contact Us for Laser Engraving, Marking & Cutting Advice (thinklaser.com)
