Laser Machine Service near Hounslow, on a Technology Supplies 4060 40W – Kingsley Academy

The visit to our customer Kingsley Academy was for a service of their Technology Supplies 4060 40 watt flatbed laser marker. This service was conducted by our service engineer ‘Gavin Edwards’. The laser marker service visit includes: –

Technology Supplies 4060 40 watt

The engineer arrived on site and commenced the laser machine service. The power from the nozzle was shown to measure 30w @72% 23mA. A piston strut on the main door was replaced as it had failed. The customer was wanting to discuss the option of installing a 60 watt tube into the machine. It was discussed that this would give them better power and range of product to mark and engrave. The new EFR Laser Tube tube was fitted with new high voltage connectors and the laser tube extension was fitted to ensure Class 1 operation.

Laser Machine Service Near Hounslow - Kingsely Academy
Laser Machine Service Near Hounslow - Kingsely Academy

The beam was fully aligned, and the rest of the service requirements, as above, were carried out. Power from the tube was measured at 70.1w @ 70% 22mA.

  • Inspect, Clean and Lubricate all Linear/Guide Rails
  • Mirror Inspection & Clean
  • Lens Inspection & Clean
  • Auto Focus Pen Inspection & Clean
  • Honey Comb Bed Inspection & Leveling
  • Electronics Inspection
  • Safety Interlocks Inspection & Test
  • Water Cooling Chiller Inspection, Clean, Drain & Refill
  • Full Laser Alignment Check
  • Laser Tube Health Check
  • Power Check @ Laser Tube & Laser Nozzle
  • Check overall machine function by Test Cutting Customer Materials

As an option for their software use, Lightburn was installed on their PC, and training was supplied on how to best use Lightburn.

Kingsley Academy‘s Nano Plus, Bofa extraction unit was also checked. The was a bit old (2020) but was still working within the machine. It was advised that this may need replacing at some point in the near future.

Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.

If you would like further information on our Laser Service near Hounslow capabilities or anywhere else in the country, or any other Laser Repairing requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.

Contact Us for Laser Engraving, Marking & Cutting Advice (

Our Service Studies

Laser Machine Service Near Shepherds Bush

Laser Machine Service near Shepherds Bush, London
Laser Module Service In Liverpool - Renishaw Am125

Laser Module Service in Liverpool, RENISHAW AM 125
Lightblade 6090 How To Use A Laser Cutter S1Ep31A

Laser Machine Service near Colchester, Essex 2 x 6090 80watt