Laser Machine Service near Colchester, Essex- Harps Corp

The visit to our customer, Harps Corp was for servicing flatbed laser markers and was conducted by our service engineer ‘Gavin Edwards’. He performed a standard service for one of our earliest customer, the service included, but is not limited too: –

  • Electrical Systems – Health Check, Fit & Function
  • Safety Interlocks & Emergency Stop- Health Check, Fit & Function
  • Air Assist Pump – Function
  • Chiller Check – Health Check, Fit & Function
  • Chiller Drain, Flush and Water Replacement
  • Full Bed Leveling – Adjustment and Check
  • Inspect, Clean and Lubricate all Linear/Guide Rails
  • Tension Check on All Drive Belts
  • Mirror Inspection & Clean
  • Lens Inspection & Clean
  • Full Laser Alignment Check
  • Laser Tube Health Check
  • Power Check @ Laser Tube & Laser Nozzle
  • Check overall machine function by Test Cutting Customer Materials
Laser Machine Service Near Colchester

Brief History – Harps Corp & Thinklaser

To give a brief background as where the relationship between Harps Corp and Thinklaser began. Harps Corp has been a customer of Thinklaser’s since our very first Lightblade machine, in fact they were the first customer to purchase a Lightblade Laser Engraving Machine system. We have come a long way since then. So have they, they bought a second machine from us a few years later and have not looked back since. Below are a few of their items that they currently make with our Lightblade systems

Harps Corp Coaster Made With Thinklaser Lightblade 6090
Harps Corp Coaster Made With Thinklaser Lightblade 6090
Harps Corp Card Holder Made With Thinklaser Lightblade 6090

Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.

If you would like further information on our Laser Servicing near Colchester capabilities or anywhere else in the country, or any other Laser Training requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.

Contact Us for Laser Engraving, Marking & Cutting Advice (thinklaser.com)

Our Servicing Studies

Laser Machine Service/Training Near Wolverhampton

Laser Machine Service/Training near Wolverhampton

Laser Machine Service/Training near Wolverhampton on a Technologies Supplies 6090 80W - Khalsa Academy

The visit to our customer, Khalsa Academy was for a routine service and some software training on their Technology Supplies 6090 80 watt flatbed laser marker. This was conducted by our service engineer 'Gavin Edwards'. The laser service investigation included: -

Technology Supplies 6090 80…

VIEW SERVICE STUDY
Laser Repair Near Walthamstow

Laser Machine Repair near Walthamstow to Investigate No Laser power

Laser Machine Repair near Walthamstow, London on a Lightbade 6090 80W - Nihal Shah

The visit to our customer, Nihal Shah was for an investigation of no laser power as discussed with the customer prior to the repair visit for his flatbed laser marker. This was conducted by our service engineer 'Gavin Edwards'. Following the repair he performed a standard service on the VIEW SERVICE STUDY

Laser Machine Training Near Birmingham

Laser Machine Training near Birmingham, West Midlands GCC X252 80 watt

Laser Machine Training near Birmingham, West Midlands on a GCC X252 - Rockwood Academy

The visit to our customer, Rockwood Academy was for a training session on the customers installed flatbed laser markers. This was conducted by our service engineer 'Gavin Edwards'. He performed a training course on a competitors machine, in this case a GCC X252 80 watt machine, the laser training course included: -

  • General Enquiry
  • General Enquiry
  • Laser Machines
  • Laser Subcontract Services
  • Parts Enquiry