Boxford Laser Service near Croydon, BGL460 80 watts – Trinity School
A visit to a new customer, Trinity School. The customer had requested a service visit as they had acquired the Boxford machine from the Old Palace of John Whitgift school, as this had closed down laser year. The laser service was conducted by our highly experienced service engineer ‘Gavin Edwards’. The laser service visit included: –
Boxford BGL460 80 watt
Upon arrival at the Trinity School the flatbed machine was visually inspected. The machine was in generally good condition, the unit had been connected to the school industrial extraction system.
The mirrors and main focusing lens were inspected. The mirrors were ok, but the focusing lens was quiet dirty. However this was able to be cleaned. Before reinstating into the nozzle assembly this was also cleaned as it was very contaminated.
The remaining items of a service were carried out with no issues: –
- Inspect, Clean and Lubricate all Linear/Guide Rails
- Auto Focus Pen Inspection & Clean
- Deep Clean of system
- Drained, flushed and refilled Chiller unit
- Honey Comb Bed Inspection & Bed Leveling off by 1mm in the right corner
- Electronics Inspection
- Fan Filters cleaned
- Safety Interlocks Inspection & Test
- Full Laser Alignment Check
- Laser Tube Health Check
The beam alignment was tested and adjusted slightly. The laser power was measured at the exit aperture of the laser nozzle and was shown to be measuring 78.9w @70%. No ammeters are fitted to these types of machines. The customer was happy with the service provided.
The customer showed us some of their work that the students had been completing and shared one with us.
Any of the consumable items mentioned above, Lens, Mirrors, Laser tubes, Power supplies are all available and can be bought separately in our online shop.
If you would like further information on our Boxford Laser Service near Croydon capabilities or anywhere else in the country, or any other Laser Training requirement or Laser Application, please request a call back or, talk to one of our service engineering specialists by going to our contact page – link below.
Contact Us for Laser Engraving, Marking & Cutting Advice
Frequently Asked Questions:
How do I improve Inconsistent Cutting Depth?
Verify that the laser head is correctly focused for the material’s thickness
Check for debris or dust on the mirrors and lenses.
Ensure that the cutting bed is level across the entire work area.
How do I stop the laser from cutting unevenly?
Inspect and clean the optical components (mirrors and lenses).
Check that the work bed is level; an uneven bed will affect cutting depth.
Ensure the material is flat and secured in place on the bed.
How to stop the laser head dragging on Material
Ensure that the material is flat and not bowed or warped.
Check the height adjustment of the laser head and set the correct z-axis distance.
Verify that the workpiece is secured properly on the bed.
