Machine type used M Series laser marking machine
Laser Source Nd:YAG Q switched
Application Alphanumeric character generation onto the phone keypad
Completion Year 2014
Customer Withheld
Material Plastic, gold plated

These luxury personalised gifts customized in 24ct. gold, rose gold and platinum all use laser marking, to create the information that makes it personalised. In some cases, the laser marking information is placed directly onto the gold plating, sometime it is marked before the plating takes place. Due to the thickness of the plating, any small amount of disruption to the base material caused by the laser marking will continue to be seen after plating. The advantage with processing this way, means that the material seal from the plating is not broken.

If you would like further information on this laser marking application, or any other application, please request a call back or talk to one of our laser marking specialists on 01737 826902.

Our Case Studies

laser marking anodised aluminium

Laser marking Anodised Aluminium – Electrical symbols

Anodising has become a dominant form of finishing for aluminium. This is largely due to its cost effectiveness, availability and suitability, across a whole host of applications and industrial sectors. Laser marking anodised aluminium, has also become an accepted process across these industrial sectors.

Anodising is an electrolytic passivation process. It changes the microscopic texture of the aluminium by modifying the crystal structure near the surface. The passivation thickness will be between 10 and 25 microns, generally between 10 and…

VIEW CASE STUDY
laser marking anodised aluminium equipment front panel

Laser marking anodised aluminium – equipment front panels

Anodising has become a dominant form of finishing for aluminium. This is largely due to its cost effectiveness, availability and suitability, across a whole host of applications and industrial sectors. Laser marking anodised aluminium, has also become an accepted process across these industrial sectors.

Anodising is an electrolytic passivation process. It changes the microscopic texture of the aluminium by modifying the crystal structure near the surface. The passivation thickness will be between 10 and 25 microns, generally between 10 and…

VIEW CASE STUDY
product branding by laser marking anodised aluminium

Product branding by laser marking anodised Aluminium

A good example of product branding by laser marking is anodised aluminium. It is used in high end audio accessories in the form of cable tidies.  The aluminium is highly polished, prior to anodising, in order to achieve the high gloss finish on the part.

The laser process, delivers small pulses of energy to the component surface. These pulses have enough energy to vaporise the surface of the aluminium where the anodised coating occurs. This exposes the base material, aluminium,…

VIEW CASE STUDY